A digital-to-analog converter (DAC) converts A digital signal to analog voltage or current buffered or unbuffered. The applicability of a DAC architecture for a specific application is determined by the resolution and sampling frequency. Dacs are commonly used in televisions and mobile phones to convert digital video data into analog video signals, connect to screen drives, and display monochrome or color images.
DUAL 8-BIT MULTIPLYING DIGITAL-TO-ANALOG CONVERTERS
32-Channel, 16-Bit, Voltage-Output DACs with Serial Interface
Dual 12-Bit 8-Bit Byte Double-Buffered CMOS D/A Converter / DAC 2-CH R-2R 12-bit 24-Pin SOL
12-Bit, uP Compatible, Double-Buffered D to A Converters / DAC 1-CH R-2R 12-bit 20-Pin CDIP
DAC 4-CH Segment 8-bit 20-Pin SOIC W T/R
8-Bit P Compatible, Double-Buffered D to A Converters / DAC 1-CH R-2R 8-bit 20-Pin CDIP
8-Bit D/A Converters / DAC 1-CH R-2R 8-bit 16-Pin PDIP Tube
8-BIT DIGITAL-TO-ANALOG CONVERTERS / DAC 1-CH R-2R 8-bit 16-Pin SOIC N
Triple 6-Bit Video DAC with Color Palette
DAC 2-CH Delta-Sigma 24-bit 8-Pin SOIC T/R
CMOS SERIAL INPUT 12-BIT DAC / DAC 1-CH Segment 12-bit 16-Pin CDIP Tube
CMOS 12-Bit Monolithic Multiplying DAC / DAC 1-CH R-2R 12-bit 18-Pin CDIP Tube
CMOS 12-Bit Monolithic Multiplying DAC / DAC 1-CH R-2R 12-bit 18-Pin CDIP Tube
DAC 1-CH R-2R 10-bit 16-Pin CDIP Tube
2-Channel Single ADC SAR 12-bit Parallel/Serial 32-Pin SBCDIP
VERY FAST, COMPLETE 10- OR 12-BIT A/D CONVERTERS / 2-Channel Single ADC SAR 12-bit Parallel/Serial 32-Pin SBCDIP Tube
DAC 1-CH R-2R 10-bit Die Tray
LOW COST DCL (driver comparator load)
LOW COST DCL (driver comparator load)
2.5 V to 5.5 V, 120 μA, 2-Wire Interface, Voltage-Output 8-/10-/12-Bit DACs
12ch 8bit D/A Converter with EEPROM | IC DAC 8BIT V-OUT 24VSOP
IC DAC 10BIT V-OUT 24QSOP